Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Meter/Gauge/Display
Model Year: 2008 Model: Sequoia Doc ID: RM000002V56002X
Title: METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector and engage the clip and install the combination meter assembly.

(b) Install the 4 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

4. INSTALL INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

5. INSTALL COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

6. INSTALL FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 Sequoia) .

Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

8. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DIAGNOSIS SYSTEM (2008 Sequoia) .